FAST FLOW CHANNEL SIMULATION

OPTIMIZATION TOOL OF THE RUNNERS

  • Validation and optimization of runner design geometries

  • Model preparation and simulation calculations in a few minutes

  • Intuitive visualization of metal flow in the runners to reduce turbulences and optimize runner sections

  • Verification of the correct ingate including flow entry angles of the metal in the cavities.

  • Transient dualphase simulation of the runners with or without shot sleeve to optimize channel shapes, injection strokes and shot speeds.

The design of the flow system within casting die technology has assumed greater importance in recent years and often represents the only tool for die designers to improve cavity filling and the level of scrap. CastleRUN works side by side with the die designer to achieve overall size and weight objectives, minimize energy loss and air entrapment during the injection phase, preview the optimal flow pattern and injection parameters. CastleRUN is an innovative simulation tool for the die design process that is both fast (model preparation and calculation takes just a few minutes) and reliable. It enables the tool designer to ensure the optimal runner geometry without running an entire simulation of the part as well as providing a platform for trying different solutions to achieve desired results.

Steady state calculation

CastleRUN provides a complete map of speed and flow pressures. This map helps to identify turbulent flows, air traps and fluid vein reductions as well as gates that are “not fully working” (e.g. where the molten metal flow is restricted through sections of the feed gates and/or where the flow at different gates is not properly balanced). 

Dual phase transient calculation

Transient filling analysis can take into account the slow shot phase to preview the behaviour of the molten metal in shot sleeve and runners. The software allows the operator to optimize slow shot speed profile to reduce air entrapment. Furthermore it gives the possibility to set up the optimal transition stroke (from slow to fast shot) in order to have a smoother filling of the cavities. 

Take an overview of our products

Castle Mind

PRACTICAL INTELLIGENCE FOR DIE CASTING

Castlemind is the innovative software solution that brings advanced calculations and foundry experience to the foundry, within an interface designed to make the software very easy to use.

Castle Run

CHECK OUT YOUR RUNNER IN 5 MINUTES

Castle Run is an innovative simulation tool for the die design process that is both fast and reliable (model preparation and calculation takes just a few minutes). It enables the tool designer to ensure the optimal runner geometry without running an entire simulation of the part.

Castle Body

GET MORE BY DIE CASTING
SIMULATION

Castlebody is the innovative software solution that includes very advanced mathematical features for die casting: the capability to simulate the combined action of a liquid (the metal) and a gas (the air) in a simple, straightforward  user friendly interface.

Castle Thermo

USER FRIENDLY DIE THERMAL CYCLING SIMULATION

Castlethermo is the simulation module for thermal cycling of the die: the full mould behaviour can be easily and realistically modelled taking into account the cooling channels and the spraying thermal effect of the release agent for state of the art filling and solidification simulations.

NEWS & EVENTS

SOLD OUT at Piq2 Meeting 2019

Tuesday October 22, 2019

NEWS & EVENTS

PiQ2 Meeting 2019

Wednesday October 16, 2019

On October 16th, the headquarters of Brescia c / o CSMT will host the annual conference of Piq2.

NEWS & EVENTS

FITMI delegation in PiQ2

Wednesday July 24, 2019

Piq2 had the pleasure of hosting at its headquarters a large delegation of FITMI (Federation of Innovative Technologies and Manufacturing Industries) founders who came to Italy from Hong Kong to visit technologically advanced companies in the die casting sector.

NEWS & EVENTS

GIFA 2019, Dusseldorf

Tuesday June 25, 2019

25th-29th June 2019

PiQ2 is glad to invite you to visit our booth (HALL 11, E67) at the GIFA 2019 trade fair. We will be very pleased to welcome you and show you the most recent updates and some preview of the upcoming CASTLE simulation suite release.

NEWS & EVENTS

CastleSuite V3.0 official release

Monday March 19, 2018

PiQ2 is pleased and proud to announce the release of Castle V3.0, the new state of the art in die casting simulation. The new version of the software features CastleAir, the module for the optimization of vacuum and venting channels. Parallel multi CPU meshing, Advanced injection profile management, transient CastleRun analysis are the main new functions that the new release offers.

NEWS & EVENTS

Castle User Meeting 2018

Monday February 26, 2018

The Castle User Meeting, an event dedicated to Piq2 Castle Software users, was held in Brescia Piq2 headquarters. 

More than 50 participants, both long-time users and new recruits, were able to follow the technical lectures presented and actively take part in discussions with PIQ2 team and other users.

NEWS & EVENTS

Euroguss 2018, Nurnberg

Tuesday January 16, 2018

16th-18th January 2018

PiQ2 will be present at the next Euroguss 2018 and will be happy to show you all of Castle's latest news.

NEWS & EVENTS

NEW EVENT AT PIQ2

Friday November 10, 2017

PIQ2 IS GLAD TO ANNOUNCE THAT THE EVENT "DOMINARE GLI ELEMENTI IN PRESSOCOLATA GRAZIE AI PROGRAMMI DI SIMULAZIONE" WILL BE HELD ON 7TH APRIL 2017 AT PIQ2 HEADQUATERS IN BRESCIA.

NEWS & EVENTS

Official release of CastleThermo v1.0: the thermal simulation module

Saturday March 18, 2017

PiQ2 is proud to announce that Castle Thermo, the new full die thermal simulation module, will be released in the upcoming months.

NEWS & EVENTS

Official relase of CastleSuite V2.3

Tuesday October 11, 2016

PiQ2 is glad to announce that CastleSuite 2.3 is being released, containing some bug fixes and calculation algorithm improvements. Visi 2016R1 and Paraview 4.4 are now supported by CastleSuite

NEWS & EVENTS

PiQ² at International Zinc Die Casting Conference in Brescia

Thursday September 01, 2016

PiQ2 will participate to the International Zinc Die Casting Conference 2016 that will be held in Brescia at DIMI – Department of Mechanical and Industrial Engineering of Brescia University, on 22th-23th September 2016. Come and visit us!

NEWS & EVENTS

HTDC 2016 – Venice

Wednesday June 22, 2016

PiQ2 will participate at the High Tech Die Casting 2016 that will be held in Venice on 22-23 June 2016. Ing. Andrea Panvini, founder of PiQ2, will present the paper “DUAL PHASE CASTING SIMULATION: performance and validation of simultaneous simulation of metal and air displacement during HPDC filling”

NEWS & EVENTS

PiQ² Webinar on NADCA website

Tuesday December 01, 2015

PiQ2 hosts a online webinar sponsored by NADCA to present a direct comparison between classic single-phase die casting software and CastleBody, the first two-phase solver for filling calculation in Die Casting Simulations!

NEWS & EVENTS

PiQ² exhibits at Euroguss 2016

Tuesday November 10, 2015

PiQ2 (Castle) , the most innovative software company for the die casting industry, is pleased to announce that it will exhibit at Euroguss (booth #7A-737) from January 12th to 14th in Nurnberg (Germany).  At the exhibition, PiQ2 will provide insights into the latest technological developments and present innovative solutions for the die casting industry, including the die design optimization and the dual phase simulation.